QuickBond EPDM Membrane Cleaner
QuickBond EPDM Rubber Membrane Cleaner is vital for cleaning EPDM surfaces. All in all, QuickBond EPDM Rubber Membrane Cleaner prepares the EPDM to receive butyl tape products such as Flashing Tapes, Cover Tapes, Pipe Boots or Seam Tape.
In addition, please note that primers must also be applied to the target area before tapes or accessories are applied.
QuickBond EPDM Rubber Membrane Cleaner may also be used to clean areas where excessive adhesive has been used or spilled.
How to use:
-
Firstly, QuickBond Rubber Membrane Cleaner is vital for cleaning EPDM surfaces.
-
Secondly, QuickBond EPDM Rubber Membrane Cleaner prepares the EPDM to receive butyl tape products such as Flashing Tapes, Cover Tapes, Pipe Boots or Seam Tape.
-
In addition, please note that primers must also be applied to the target area before tapes or accessories are applied.
-
Finally, QuickBond EPDM Membrane Cleaner may also be used to clean areas where excessive adhesive has been used or split.
General information:
-
QuickBond EPDM Membrane Cleaner should be stored in a well-ventilated area, at room temperature between 15.5 °C and 7 °C.
-
It should be stored in the original sealed explosion-proof container away from all sources of direct heat and ignition.
-
It is extremely flammable and must be kept away from electrical equipment, sparks, open flames and other sources of ignition.
-
Avoid breathing vapours and use only in well-ventilated areas.
-
Furthermore, handle with impervious gloves and goggles.
If you have any queries, please get in touch with our friendly team. Call us if you are unsure about the materials you need for your roof on 01392 927729 or email sales@rubberflatroof.co.uk. You can also check out our Roof Calculator that estimates all the materials you will need for your rubber roofing project.
