6” Reinforced Perimeter Strip Tape EPDM Rubber Roofing Membrane Roll
The 6" Reinforced Perimeter Strip (RPS) is a 150mm reinforced strip of EPDM with a bonding tape pre-applied along one edge. The Reinforced Perimeter Strip secures upstand details.
At Rubber Flat Roof, the 6" Reinforced Perimeter Strip is available by linear metre or in a 30.48m roll.
The Reinforced Perimeter Strip (RPS) also referred to as Reinforced Universal Secure Strip is a 150mm reinforced strip of EPDM. The strip secures upstand details.
At Rubber Flat Roof, the 6" Reinforced Perimeter Strip is available by linear metre or in a 30.48m roll.
Key Features:
-
Like most single ply membranes, EPDM rubber membranes will try and shrink over time. By mechanically fixing a Reinforced Perimeter strip at all upstands, it is possible to reduce the opportunity for the EPDM membrane to pull away from the upstand detail. This will keep the EPDM secure.
How does it work?
-
The Reinforced Perimeter Strip has a bonding tape pre-applied along one edge.
-
This bonding edge is chemically welded to the underside of the EPDM using the Seam Tape Primer.
-
This ensures that the EPDM membrane does not require puncturing during installation.The 6" Reinforced Perimeter Strip may be fixed using fastening plates. Alternatively, a Termination Bar, with the appropriate fasteners for the substrate you are fixing to, may be used.
If you have an queries, please get in touch with our friendly team. Call us if you are unsure about the materials you need for your roof on 01392927729 or email sales@rubberflatroof.co.uk. You can also check out our Roof Calculator that estimates all the materials you will need for your rubber roofing project.